 |
|
|
 |
Sleeves,
Solvent Recovery - Sparge Tubes,OI Machine
- Sparge Tubes, Tekmar
- Springs/Stoppers
| |
|
|
 |
RG19080
SCOTT OIL DETERMINATION APPARATUS WITH INCLINED FLAT PLATE
Also known as lowa State Apparatus. |
|
|
RG19445
SLEEVES,
TEFLON® - ECONOMY GRADE
We offer the largest selection sleeves to fit ground joints
of all sizes from
7/10
to 135/60. Our sleeves are rugged with a minimum wall
of 3 mil, and are readily reuseable.
| FULL LENGTH SLEEVES |
MEDIUM LENGTH SLEEVES |
-01 7/25
-02
10/30
-03 12/30
-04
14/35
-05 19/38
-06
24/40
-07 29/42
-08
34/45
-09 40/50
-10
45/50
-11 50/50
-12
55/50
-13 60/50
-14 71/60
-15
86/50
-16 103/60
-17
115/60
-18 135/60 |
-19
7/10
-20 10/18
-21
12/18
-22 14/20
-23
19/22
-24 24/25
-25
29/26
-26 34/28
-27
40/35 |
|
| |
RG19560
SOLVENT RECOVERY APPARATUS, KUDERNA DANISH
An in-line solvent condenser for use with Kuderna-Danish
Evaporative Concentrators. This unit can easily be added
and would require no additional clamp support. Operation
of this apparatus is recommended in a fume hood. Lower
joint is a
24/40; collection tube is a
12/2.
Reference: Analytical Chemistry Vol.476, No. 11 Page
1879.
| -01 |
Condenser only,
335mm |
| -02 |
Collection tube only,
8mm O.D. x 475mm |
| -03 |
Clamp (RG3360-01), Size 12 |
|
|
|
RG19561
SOLVENT RECOVERY, HARRISON
For recovery of Freon® and/or Methylene Chloride.
-01
Complete unit, 12L
-02 Complete unit, 22L
-03 Adapter (RG 1120-01)
-04 Column, Vigreaux (RG3475-11)
-05 Condenser (RG3550)
-06 Flask, 12L, 2-necks 45/50 &
24/40
-07 Flask, 22L, 2-necks 55/50 &
24/40
-08 Transfer tube
-09 Mantle with control (RG8211)
-10 Mantle with control (RG8211)
-11 Stopper (RG19775-08)
-12 Stopper (RG19775-09)
|
| |
RG19565
SOLVENT, OXYGEN FREE RESERVOIR
Used with Distilling Apparatus to keep solvents pure
and free of oxygen. Complete unit includes reservoir/head,
boiling flask, distilling column, Allihn condenser,
adapter. Joints are
24/40. Needs a heating mantle.
|
|
|
|
|
|
| |
|
|
| |
RG19600
SPARGE/SOIL TUBE FOR Ol MACHINE Without frit, plain
top.
| -01 |
5ml |
12mm top |
| -02 |
25ml |
12mm top |
| -03 |
25ml |
12mm top |
| -04 |
5ml |
18mm top |
| -05 |
25ml |
18mm top |
| -06 |
same length as 25ml but with
38mm body |
|
|
|
RG19601
SPARGE/PURGE SAMPLER TUBES FOR Ol MACHINE
Plain top with and without medium frit. Unground 6
and 12 mm tubes.
| -01 |
5ml |
with frit |
| -02 |
5ml |
without frit |
| -03 |
25ml |
with frit |
| -04 |
25ml |
without frit |
| -05 |
5ml |
with frit, 18mm top |
| -06 |
5ml |
without frit, 18mm top |
| -07 |
25ml |
with frit, 19mm top |
| -08 |
25ml |
without frit, 19mm top |
|
| |
RG19602
Sparge/purge tubes for OI with 3/4"
top.
|
|
|
RG19605
SPARGE TUBE WITH FRIT FOR Ol MACHINE
12mm medium wall center stem and 6mm medium wall sidearm
with bulb top to reduce sample loss. Includes medium
porosity frit.
| -01 |
5ml |
with frit |
| -02 |
5ml |
without frit |
| -03 |
25ml |
with frit |
| -04 |
25ml |
without frit |
| -05 |
5ml |
with frit, 18mm top |
| -06 |
5ml |
without frit, 18mm top |
| -07 |
25ml |
with frit, 19mm top |
| -08 |
25ml |
without frit, 19mm top |
|
|
|
| |
|
|
| |
RG19620
SPARGE/PURGE SAMPLER TUBES FOR TEKMAR
Used for analysis of solids, soils and samples that foam.
| -01 |
5ml |
plaintop |
| -02 |
5ml |
ground top |
| -03 |
25ml |
plaintop |
| -04 |
25ml |
ground top |
|
|
|
RG19621
-01
Sparge tube, 5ml w/serum injection port and frit
-02 Same as -01 but w/o frit |
|
RG19622
SPARGE/PURGE AND SOIL TUBE FOR TEKMAR
With or without medium frit,
1/4" - 1/2" centerless ground tubes.
| -01 |
5ml |
with frit |
| -02 |
5ml |
without frit |
| -03 |
25ml |
with frit |
| -04 |
25ml |
without frit |
| -10 |
10ml |
with frit |
|
|
|
RG19623
SPARGE/PURGE TUBE, 1/4" GROUND AND SEPTUM SIDE NECK
FOR TEKMAR
Fits Tekmar ALS machines with 1/4" ground tube and
3/8" septum neck. With or without frit.
| -01 |
5ml |
with frit - Supelco body OD
14mm and 16mm |
| -02 |
5ml |
without frit |
| -03 |
25ml |
with frit |
| -04 |
25ml |
without frit |
| -05 |
5ml |
with frit - body OD 13mm and 12mm |
|
|
RG19624
SPARGE/PURGE SAMPLER TUBE
Plain or ground top for Tekmar ALS Auto Samplers.
| -01 |
5ml |
plaintop |
| -02 |
5ml |
ground top |
| -03 |
25ml |
plain top |
| -04 |
25ml |
ground top |
| -05 |
25ml |
plain top - 140mm OA |
| -06 |
25ml |
ground top - 140mm OA |
|
|
|
RG19625
SPARGE/PURGE TUBE, JACKETED/HEATED FOR TEKMAR
Plain top with medium porosity frit; 1/4" and 1/2"
tubes. -01 5ml
-02 25ml |
| |
RG19626
SPARGE/PURGE TUBE, JACKETED FOR TEKMAR
For use with soils with a water jacket to keep temperature
constant. Threaded opening is large enough to accept a
spatula easily. Lined cap #18-415. |
|
|
RG19627
SPARGE/PURGE TUBE, JACKETED/HEATED FOR TEKMAR
Compact enough to fit in a series on ALS 2000. Ground
tubes with medium porosity frit. -01
5ml |
| |
RG19628
SPARGE/SOIL TUBE FOR TEKMAR 2000
Made with 1" diameter body. Threaded top opening
will accept spatula easily. Plain or ground tops with
medium porosity frit. Teflon® lined cap #18-415. -01
25ml - Plain end
-02 25ml - Ground end |
|
|
RG19629
SPARGE/PURGE SAMPLER TUBE FOR TEKMAR 2050
Plain top with or without medium porosity frit.
| -01 |
5ml |
with frit |
| -02 |
5ml |
without frit |
| -03 |
25ml |
with frit |
| -04 |
25ml |
without frit |
|
| |
RG19630
SPARGE/PURGE SAMPLER TUBE FOR TEKMAR 2050
Ground top with or without medium porosity frit.
| -01 |
5ml |
with frit |
| -02 |
5ml |
without frit |
| -03 |
25ml |
with frit |
| -04 |
25ml |
without frit |
|
|
|
RG19631
SPARGE/SOIL TUBE, ERIC TYPE FOR TEKMAR
Used for soils; bulbs allow foaming action. Can be
used in a series on Tekmar machines. Please specify
plain or ground end.
|
| |
RG19632
SPARGE/PURGE HEATED SAMPLER TUBE
Low level soil heated purge tube for use with Tekmar
4200 ALS, with a 19mm OD.
| -01 |
6" |
Borosilicate |
| -02 |
6" |
soft glass |
| -03 |
8" |
Borosilicate |
| -04 |
8" |
soft glass |
|
|
|
|
|
|
| |
|
|
| |
RG19760
SPRINGS, STAINLESS STEEL
|
Length |
|
Joint |
Package |
| -01 |
19mm |
7/25 - 19/22 |
12 |
| -02 |
25mm |
19/38 - 29/42 |
12 |
| -03 |
32mm |
34/45 - 40/50 |
12 |
| -04 |
23mm |
use for 7880 |
|
|
|
RG19761
Teflon® plug.
-01 2mm
-02 4mm
-03 6mm
|
|
|
|
|
|
|
| |
RG19775
STOPPER, PENNYHEAD - FULL LENGTH Hollow with closed bottom.
| -01 |
10/30 |
-06 |
29/42 |
| -02 |
12/30 |
-07 |
34/45 |
| -03 |
14/35 |
-08 |
45/50 |
| -04 |
19/38 |
-09 |
55/50 |
| -05 |
24/40 |
|
|
|
|
|
RG19776
STOPPER, PENNYHEAD HOLLOW- MEDIUM LENGTH
| -01 |
10/18 |
| -02 |
14/20 |
| -03 |
19/22 |
|
| |
RG19780
STOPPER, FLASK LENGTH, SOLID, PENNY
#38 stopper is hollow, all other sizes are solid. -01
size 9
| -01 |
size 9 |
-05 |
size 22 |
| -02 |
size 13 |
-06 |
size 27 |
| -03 |
size 16 |
-07 |
size 32 |
| -04 |
size 19 |
-08 |
size 38 |
|
|
|
RG19781
Stoppers, Sibata brand, glass.
| -01 |
# 9 |
-04 |
# 19 |
| -02 |
# 13 |
-05 |
# 22 |
| -03 |
# 16 |
-06 |
# 27 |
|
| |
RG19785
STOPPERS, PTFE, SOLID, KEY MEAD,
FLASK LENGTH
Used for flasks, mixing cylinders, separatory funnels,
etc. Color coded and designed from ASTM Spec. E675.
| |
|
Size |
Length |
| -01 |
13 |
14.0mm |
| -02 |
16 |
15.0mm |
| -03 |
22 |
20.5mm |
| -04 |
27 |
21.5mm |
| -05 |
38 |
30.0mm |
| -06 |
8 |
12.0mm |
| -07 |
9 |
12.0mm |
|
|
|
RG19789
Stoppers, Sibate brand, polyethylene.
| -01 |
# 9 |
-04 |
# 19 |
| -02 |
# 13 |
-05 |
# 22 |
| -03 |
# 16 |
-06 |
# 27 |
|
|
|
RG19790
STOPPER, LINEAR HIGH-DENSITY POLYETHYLINE
Replacement part for use in necks of mixing cylinders,
flasks, separatory funnels.
stopper
dimensions with closed bottom.
| -01 |
size 8 |
fits neck ground to stopper |
size 8 |
| -02 |
size 9 |
fits neck ground to stopper |
size 9 |
| -03 |
size 13 |
fits neck ground to stopper |
size 13 |
| -04 |
size 16 |
fits neck ground to stopper |
size 16 |
| -05 |
size 19 |
fits neck ground to stopper |
size 19 |
| -06 |
size 22 |
fits neck ground to stopper |
size 22 |
| -07 |
size 27 |
fits neck ground to stopper |
size 27 |
| -08 |
size 32 |
fits neck ground to stopper |
size 32 |
| -09 |
size 38 |
fits neck ground to stopper |
size 38 |
|
|
|
|
 |
|
|
|
|
 |
socket
joints. Use pinch clamps to secure on parts.
