 |
|
 |
Tecator/Tubs
- Tubes, Culture/Digestion - Traps
| |
|
|
|
|
RG20160
TECATOR, BOILING RODS
For digestion systems. Rods function as boiling chips
during liquid digestions. Use with RG20165. |
|
|
RG20165
Used with RG20160 Rods. |
|
|
RG20800
TUBE, CENTRIFUGE, PLAIN
Conical with Teflon® lined screw cap. Supplied
in packages of 12.
|
Capacity
ml |
G.P.I.
Thread size |
Fits I.E.C.
Shield No. |
Overall
Height
mm |
O.D.
mm |
| -01 |
15 |
415 - 15 |
302 |
130 |
16.5 |
| -02 |
50 |
410 - 24 |
320 |
158 |
28 |
|
|
|
RG20805
TUBE, CENTRIFUGE, PLAIN
With appropriate size 
flat head stopper. Useful as a shaking or storage
tube in addition to centrifuging. Flat head stoppers
can be placed on the bench without contaminating the
ground zone. If specified, solid pennyhead stoppers
will be supplied in place of the flat head type at
no change in price. Supplied in packages of 12.
|
Capacity
ml |
Stopper |
Fits I.E.C.
Shield No. |
Overall
Height
mm |
O.D.
mm |
| -01 |
15 |
9 |
321 |
91 |
10.75 |
| -02 |
5 |
9 |
322 |
116 |
13 |
| -03 |
15 |
13 |
302 |
131 |
17 |
| -04 |
50 |
19 |
320 |
148 |
29 |
|
|
|
| |
|
|
|
|
RG20815
TUBE, CULTURE, BOROSILICATE GLASS, DISPOSABLE
For general bacteriological use. Has a round bottom
and plain end.
-01
-02
-03
-04
-05
-06
-07
-08
-09
-10 |
10 x 75
12 x 75
12 x 76KDA
13 x 100
15 x 85
16 x 100
16 x 125
16 x 150
18 x 150
20 x 150 |
1,000/case
1,000/case
1,000/case
1,000/case
1,000/case
1,000/case
1,000/case
1,000/case
500/case
500/case |
|
|
|
RG20822
Tube block digestion.
| -01 |
26x2
wall 300mm long, Simple bead top, round bottom |
| -02 |
Same as -01 but with
25ml Mark single ring |
|
|
|
RG20824
Tubes, block digestion
| -01 |
Coldfinger |
75ml |
| -02 |
Coldfinger |
250ml |
| -03 |
dig tube |
75ml |
| -035 |
with a ring at |
25ml |
| -04 |
dig tube |
250ml |
| -05 |
dug tybe w/flat bottom |
75ml |
|
|
|
RG20825
TUBE, DIGESTION, VOLUMETRIC
| -01 |
75ml |
5/pack |
| -02 |
75ml |
40/pack |
| -03 |
250ml |
5/pack |
| -04 |
250ml |
25/pack |
|
|
|
RG20826
TUBE, DIGESTION, STRAIGHT STANDARD
-01 250ml 5/pack
-02 250ml 25/pack |
|
|
RG20827
TUBE, DIGESTION, ENGRAVED
Same as RG20825 except with marks at 12.5, 25 and 50 ml.
-01 75ml 5/pack
-02 75ml 40/pack |
|
|
RG20828
Tgreaded abd ebgraved at 12.5ml, 25ml and 75 ml (DEP)
-01 5pcs
-02 40pcs
-03 250pcs |
|
|
RG20830
TUBE, DIGESTION WITH THERMO WELL
Similar to RG20826 except is equipped with a thermometer
well which permits constant temperature readings. |
|
|
RG20840
TUBE, GAS DISPERSION, FRITTED CYLINDER
Approximately 12 mm OD x 20mm long. Stem is 8 mm OD x
250mm long.
-01 Fine porosity
-02 Medium porosity
-03 Coarse porosity
-04 Extra coarse porosity |
|
|
RG20850
TUBE, DRUM SAMPLER, BOROSILICATE
High temperature glass approximately 1/2" ID x 40"
long for siphoning liquid from 50 gallon drums. |
|
|
RG20851
TUBE, DRUM SAMPLER, SOFT GLASS
Glass tubing approximately 1/2" ID x 40" long
for siphoning liquid from 50 gallon drums. |
|
|
RG20855
TUBE, DRYING
Body is approximately 1&3/4" OD by approximately
150mm long, and the tip is angled.
-01 150mm
-02 100mm |
|
RG20856
drying tubes, reservoir type, approx. 60ml (Supelco Type) |
|
|
RG20857
Drying tubes. Reusable column with reservoir approx. 30ml
(supelco type) |
|
|
RG20860
TUBE, EXTRACTION
Used in extraction of cottonseed meal with petroleum ether.
Body is approximately 1 & 1/4" diameter medium
wall x 125mm long; tip is angled.
-01 Angle tip
-02 Straight tip |
|
|
RG20861
TUBE, EXTRACTION
Similar to RG20860 except body is approximately 1 &1
/4" diameter medium wall x 180mm long.
-01 Angle
-02 Straight |
|
|
RG20880
TUBE, G.P.C.
Threaded tube for AS 2000 System. Improved to reduce thread
chipping; 150mm long. |
|
|
RG20970
TUBES, CONCENTRATOR, TURBO VAP
For use with Turbo Vap II.
-01 Plain 200ml
volume with 1/2ml tip
-02 Plain 200ml volume with 1 ml tip
-03 Discontinued
-04 1ml tip with mark at 0.5ml, 1ml,
line at 200ml
-05 500ml w/graduated tip at 0.5ml, 1.0ml
-06 190mm OA, plain, 1ml tip
-07 190mm OA, 1ml graduated tip
-08 190mm OA, 0.5ml tip
-09 200mm plain w/o tip |
|
|
| |
|
|
|
|
RG21680
TRAP, EVAPORATOR
Used in rotary evaporators. Consists of a round body
with upper and lower stems. The lower stem, with a
inner joint at bottom, extends inward inside the boday
and has two side openings near the top which is closed.
The upper stem has a
24/40 outer joint.
| -01 |
100ml with |
|
14/20 lower inner joint |
| -02 |
100ml with |
|
19/22 lower inner joint |
| -03 |
100ml with |
|
24/40 lower inner joint |
| |
|
|
|
| -04 |
250ml with |
|
14/20 lower inner joint |
| -05 |
250ml with |
|
19/22 lower inner joint |
| -06 |
250ml with |
|
24/40 lower inner joint |
| |
|
|
|
| -07 |
500ml with |
|
14/20 lower inner joint |
| -08 |
500ml with |
|
19/22 lower inner joint |
| -09 |
500ml with |
|
24/40 lower inner joint |
| |
|
|
|
| -10 |
1000ml with |
|
24/40 lower inner joint |
| -11 |
1000ml with |
|
29/42 lower inner joint |
|
|
|
RG21681
TRAP, EVAPORATOR BEROZE
similar to RG21680 except with addition of a side tube
having a vacuum tight Teflon® plug. The side tube
has an internal restriction so that vacuum can be released
gradually at the end of a concentating operation by
controlled withdrawal of the plug (Morton Beroza, Chem-Anal,
52 pp.
22-23, January 1963). THe top stem has a
24/40 female joint.
| -01 |
100ml with |
|
24/40 lower inner joint |
| -02 |
250ml with |
|
24/40 lower inner joint |
| -03 |
500ml with |
|
24/40 lower inner joint |
| -04 |
1000ml with |
|
24/40 lower inner joint |
| -05 |
1000ml with |
|
29/42 lower inner joint |
|
|
|
|
 |
|
|
|
 |
